Most importers decide between FCL and LCL by comparing two freight quotes. That is the wrong comparison, and it is why so many shipments that looked cheaper on paper end up costing more at the warehouse door. The ocean leg is only one component, and on LCL it is frequently not even the largest one.
Key Takeaways
- FCL = you book the whole box. LCL = you share it and pay for the space you use.
- LCL is charged on the greater of volume or weight — the revenue tonne. Dense cargo gets charged on weight.
- The rough crossover is around 13–15 CBM for a 20ft, but destination charges often pull it lower.
- LCL typically adds a week or more through consolidation and deconsolidation.
- LCL carries higher handling risk — your cargo is loaded and unloaded alongside strangers' freight.
The basic distinction
FCL (Full Container Load) means you have exclusive use of a container. It is sealed at origin, usually at your facility or the forwarder's warehouse, and that seal is not broken until it reaches the destination. Crucially, FCL does not mean the container is full — you can ship a half-empty 20ft as FCL if you choose.
LCL (Less than Container Load) means your cargo travels with other shippers' consignments in a shared container. At origin it goes to a container freight station to be consolidated with other cargo; at destination it is deconsolidated before you can take delivery.
Container capacity reference
| Container | Approx. internal volume | Practical loadable volume | Typical max payload |
|---|---|---|---|
| 20ft standard | ~33 CBM | ~25–28 CBM | ~21–28 tonnes |
| 40ft standard | ~67 CBM | ~54–58 CBM | ~26–30 tonnes |
| 40ft high cube | ~76 CBM | ~60–68 CBM | ~26–30 tonnes |
Practical loadable volume is always below internal volume, because pallets, packaging and the geometry of your cartons waste space. Plan on filling 75–85% of nominal capacity unless your cargo stacks perfectly. You can estimate your own volume with the CBM calculator on our homepage.
How each is priced
FCL
A flat rate per container for the ocean leg, plus origin and destination charges that are largely fixed per container regardless of what is inside. The per-CBM cost falls continuously as you fill the box, which is why FCL rewards volume.
LCL
Charged on the revenue tonne — the greater of your cubic metres or your metric tonnes, with 1 CBM conventionally treated as equal to 1 tonne. Machine parts at 2 CBM weighing 3 tonnes are charged as 3; cushions at 8 CBM weighing 600 kg are charged as 8.
On top of the per-CBM freight sit charges that do not scale down with your volume:
- Container freight station handling at origin
- Documentation and bill of lading fees
- Destination terminal handling
- Deconsolidation and devanning charges at destination
- Local delivery order fees
That fourth item is where small LCL shipments get painful. Destination charges on LCL in many markets are high relative to the freight itself, and they are charged whether your consignment is 1 CBM or 10. A 2 CBM shipment can arrive with destination charges exceeding what you paid for the ocean freight.
Always ask for the all-in landed figure. An LCL quote that shows only "US$X per CBM" is not a quote — it is the first line of one. Ask specifically what the destination charges will be at Karachi, because that is the number that decides whether LCL was actually the cheaper option.
Where the break-even really sits
The conventional rule of thumb puts the crossover at around 13–15 CBM, at which point a 20ft FCL typically beats LCL. Treat that as a starting point rather than an answer, because three things move it:
- The rate environment. When container spot rates are low, FCL becomes competitive at much lower volumes. In a soft market we have seen the crossover fall below 10 CBM.
- Destination charge structure. High LCL destination charges push the crossover down. Low ones push it up.
- Cargo density. Heavy cargo hits the weight basis early and effectively loses the volume discount LCL is supposed to offer.
In practice, if you are above 10 CBM it is always worth pricing both. Above 15 CBM, FCL is usually the answer.
Beyond cost: four factors that decide it anyway
1. Transit time
LCL adds time at both ends. Cargo must arrive at the CFS ahead of the consolidation cut-off, wait for the box to fill, and then be deconsolidated at destination before release. A week of additional end-to-end time is normal; two is not unusual when a consolidation is slow to fill.
2. Handling risk
In LCL your cartons are stuffed and stripped alongside other people's cargo by people who have no particular interest in yours. Damage rates are structurally higher than FCL, and if a co-loaded consignment leaks, contaminates or is infested, your goods are in the same box. Fragile and high-value cargo is a poor fit for LCL.
3. Customs exposure
This one catches people out. If another shipper's consignment in your shared container triggers a customs hold, the whole container can be detained — including your fully compliant cargo. You have no control over your co-loaders' paperwork, and no recourse when it goes wrong.
4. Security
FCL is sealed at origin and the seal number is recorded on the bill of lading. That seal is a genuine chain-of-custody control. LCL has no equivalent.
Decision guide
| Your situation | Usually the right call |
|---|---|
| Under 10 CBM, not urgent, robust cargo | LCL |
| 10–15 CBM | Price both — it is genuinely close |
| Over 15 CBM | FCL |
| Fragile, high-value or sensitive goods | FCL at almost any volume |
| Tight deadline | FCL |
| Dense, heavy cargo in small volume | Price both — weight basis erodes the LCL advantage |
| Regular monthly flow from one origin | FCL, and ask about a consolidation programme |
A third option people forget: buyer's consolidation. If you buy from several suppliers in the same country, we can collect from each, consolidate into one FCL at origin and ship it as a single container. You get FCL economics and control on volumes that individually would only have justified LCL. This is a core part of what we do on both our import and export consolidation services.
Frequently asked questions
Can I ship a half-empty container as FCL?
Yes. FCL is about exclusive use, not fullness. If speed, security or customs isolation matters more than squeezing the last rupee out of the freight, a partly filled FCL is a perfectly rational choice.
How do I calculate my CBM?
Length × width × height in metres, per carton, multiplied by the number of cartons. Use the outer packed dimensions, not the product dimensions. There is a calculator on our homepage.
Does LCL work for exports from Karachi?
Yes. We run export consolidation from Karachi, particularly to Europe and the Middle East, which lets smaller exporters reach those markets without committing to a full container.
Not sure which way to go?
Send us your dimensions, weight, origin and deadline, and we will price both options as an all-in landed figure — so you are comparing the numbers that actually matter.
Compare FCL and LCL